please dont rip this site

Motion Sensors

Quadrature Encoders

Global Positioning Systems

Mice are often overlooked as motion or position encoders.

Peter L. Peres [plp at ACTCOM.CO.IL] says:

...the oldest trick: use an inexpensive casette tape head as pickup. You can use an external magnet or magnetize the screw (or the head). It is very sensitive. Picking up a #3 Philips screw head at 5 mm and 10 rot/sec is easy and the voltage goes up with rpm. I have used LM358 amplifiers with this.

A {Hall Effect} sensor is a couple of orders of magnitude less sensitive than a magnetic head and you will have some noise problems likely. I had some.

Speed sensors +

Questions:

See also:

file: /Techref/io/sensor/posd.htm, 1KB, , updated: 2018/1/28 19:42, local time: 2024/11/22 07:17,
TOP NEW HELP FIND: 
3.133.139.28:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/Techref/io/sensor/posd.htm"> Motion Sensors</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .