Metals and Metal Working / Machineing +
BTY: You can use hot melt glue guns to make plastic injection molded parts.
Hot plastic is injected into a mold. It must cool in the mold, then be ejected. Plastic shrinks a bit as it cools, which helps it release.
|file: /Techref/castings.htm, 3KB, , updated: 2019/8/18 10:27, local time: 2019/10/18 06:01,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/Techref/castings.htm"> Casting</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!